|Place of Origin:||Henan|
|Minimum Order Quantity:||1000M|
|Packaging Details:||Wooden drum|
|Payment Terms:||L/C, D/A, , D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||200 tons per day|
|Material:||Aluminum Alloy||Voltage Type:||High Voltage|
|Supplier By Area:||Asia,South America,South Africa||MOQ:||10km|
|Sample:||Free||Cross Section Area::||10-800mm2|
|Type Of Conductor::||Stranded|
800mm2 AAAC Cable,
800mm2 aaac panther conductor,
Overhead AAAC Cable
Overhead Transmission Line 800mm2 AAAC All Aluminum Alloy Conductor Cable
Aaac alloy overhead Conductor have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
AAAC 6201-T81 Applications
The bare aluminum alloy conductors type AAAC (All Aluminum Alloy Conductor) 6201-T81 stranded classes AA and A are used for transmission and distribution lines of electric power, when for reasons of design of the line, a high tensile stress is needed (even bigger that the obtained with 5005-H19) and a high ratio mechanical stress-weight for the optimization of the sags in long spans. These conductors are especially useful for installation in coastal areas or of high environmental corrosion, where the ACSR cannot be used.
AAAC 6201-T81 Specifications
The bare aluminum alloy conductors AAAC 6201-T81 manufactured by ELECTROCABLES C.A., meets the following specifications and standards:
AAAC 6201-T81 Construction
The bare aluminum alloy conductors type AAAC 6201-T81 are concentrically stranded, and they are built with wires of this alloy. Their packaging is in reels in lengths according to the client's necessities.
AAAC 6201-T81 Detail of the Cable
Aluminum Conductor 6201 - T81
Aluminum Alloy Conductors A.A.A.C 6201-T81
CONDUCTOR MANUFACTURED UNDER STANDARDS:ASTM B-398 • ASTM B-399 • INEN
PACKAGING:For all sizes
Z - Length as per customer's requirements.
AMPACITY IN AMPERES:
Calculated for a conductor temperature of 75 ºC, ambient temperature 25 ºC, emissivity of 0.5, wind of 0.61 m/sec. and with sun effect (1033 watts/m2).
(1). The permissible long-time operating temperature for aerial conductor is 70 degree.
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.
Contact Person: Elva Jin